Switch back signal LED - Toyota C-HR Forum
LinkBack Thread Tools
post #1 of 4 (permalink) Old 02-15-2018, 11:28 AM Thread Starter
Junior Member
Join Date: Nov 2017
Posts: 22
Switch back signal LED

Hi all,

I want to install switchback LEDs in my front turn signals. This requires tapping the accessory. I would rather tap the DRL so that in white DRL mode they work with the existing DRL. Has anyone successfully done this?
Rubyredpearl is offline  
Sponsored Links
post #2 of 4 (permalink) Old 02-16-2018, 09:15 AM
Senior Member
Join Date: Nov 2015
Posts: 410
As far as I know, nobody has tried splicing switchback LED wires with the DRL so you're going to be the first one to do so if that's what you go for. Wish I could help, but electronic installs are beyond me.
TubeMan is offline  
post #3 of 4 (permalink) Old 02-16-2018, 12:48 PM Thread Starter
Junior Member
Join Date: Nov 2017
Posts: 22
Installed them today. I tapped of the red wire at the plug for the factory DRL and they work great. The amber is brighter than stock and the white is whiter that the stock tri DRL. I installed lasfit LED headlights earlier and now when my lights are on, the whole front is a beautiful bright white.
Rubyredpearl is offline  
Sponsored Links
post #4 of 4 (permalink) Old 02-16-2018, 09:54 PM
Adamturbo's Avatar
Join Date: Dec 2017
Posts: 37
6 pin plug, green is drl , drl turn off when headlights on. Red wire on 6 pin is power with side marker lights on and headlights on but no power with light switch off.

Certified machinist /fabricator.
Adamturbo is offline  

Quick Reply

Register Now

In order to be able to post messages on the Toyota C-HR Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Please enter a password for your user account. Note that passwords are case-sensitive.


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:


Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page

Similar Threads
Thread Thread Starter Forum Replies Last Post
Water and Suds Getting Into The Top of the Back Hatch After Washing utahfred66 Toyota C-HR Issues And Problems 8 01-11-2018 12:59 PM
Signal Lights/ hazard lights stopped working melvsz Toyota C-HR Issues And Problems 2 12-15-2017 03:20 AM
DIY video on installing automatic brake hold/hill start activation switch rajeevvelikkal Accessories And Add Ons 2 12-11-2017 10:50 AM
Nissan Juke owner looking to make the switch. Alextation New Member Introductions 7 06-22-2017 02:17 PM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

For the best viewing experience please update your browser to Google Chrome