Toyota CH-R Hy-Power Concept at a Glance - Toyota C-HR Forum
 
LinkBack Thread Tools
post #1 of 3 (permalink) Old 09-26-2017, 01:44 PM Thread Starter
Administrator
 
ToyotaCHRAdmin's Avatar
 
Join Date: Feb 2010
Posts: 126
Toyota CH-R Hy-Power Concept at a Glance


Exterior

This new design concept from Toyota is a clean representation of what a tasteful level of customization can look. Not only the modifications done but how they were done. The execution in bringing it together wasn't an easy thought process. Dark Carbon and anodized Burning Orange were brought together in a way mother nature intended as you will find out below:

Quote:
From the start of the Toyota C-HR Hy-Power Concept project the design team knew that they did not want to use heavy customisation or “bolted-on” elements to achieve the impact they were looking for. Instead, their skills were applied to amplifying the inherent qualities of the production car’s design through innovative use of colours, finishes and detailing. In fact, the concept uses exactly the same sheet metal as the showroom car.

Exploring the diamond theme that underpins the Toyota C-HR’s styling more deeply, the team at ED2 found inspiration in the natural forces that turn carbon into diamonds and the way in which solid rock can conceal a fiery, molten core.

This thinking led to the use of a new Dark Carbon silver paint with a matt finish to accentuate the interplay between the vehicle’s sharp lines and deeply sculpted surfaces. The effect is heightened by the use of gloss black elements, including the lower front lip spoiler, the area above the Toyota emblem on the front of the car and the wheel arch trims. Dark chrome sustains this effect, witnessed in the headlamp ornamentation, window frames and in the 20-inch alloy wheels.

A dramatic contrast is struck by dazzling use of an anodised Burning Orange finish on the front pillars, the door mirror housings and an accent bar within the headlamp units. The colour is also used as a highlight within the black diamond mesh pattern of the lower grille.

The use of colour, texture and form combine to even greater effect on the concept car’s roof. A unique, “diamond-cut” film covers the entire surface in a faceted, crystalline pattern that flows from darkest black at the rear to brilliant anodised orange at the front, mixing together contrasting matt and gloss planes.
____________________________
















Interior

If you thought the exterior was nice, one look at the interior will take your attention away from everything else. Its a level of design and thought expected in flagship models from some of the worlds best luxury car makers. Of all the things to come to production, this isn't one of them - sorry.

Quote:
The interior carries forward the exterior themes to sustain the power of the concept’s design with a tone-on-tone approach the combines black upholstery and trim with Burning Orange details.

The highly supportive seats are finished in black leather with orange headrests and bolsters. Burning Orange yarn has been used to create a unique, asymmetrical quilting pattern of multiple diamond shapes across the seatbacks and cushions. The design is replicated on the inner door panels, which also feature orange arm rests. A further flourish is provided by the orange finish for the highlight trim that extends the full width of the instrument panel and frames the Toyota Touch® 2 multimedia touchscreen.
____________________________
















The New Hybrid Powertrain

At the center of it all is what we're really after and similar in was to whats available if you live in the current CH-R Hybrid markets. This one is different, tailored to give a sportier feel, its what North America and other highly competitive markets can expect in the future. Just expect to pay a healthy premium.

Quote:
The concept has been designed around the use of a new hybrid powertrain that offers more power and performance than the 122 DIN hp system featured in the current production Toyota C-HR. This reflects a significant and strategic future development of Toyota’s world-leading technology that will higher performance hybrid options being made available in all its core models. More details regarding this expansion of hybrid will be revealed early in 2018.
____________________________















Contributions From The ED2 Design Center

Wondering who were the brains behind such a brilliant creation? Look no further than ED2 Design Center, Toyota's European Design arm. Yes, they are no Calty but if there's an indication that they can deliver, the CH-R Hy-Power Concept is a clear example. Below you will find an interview with ED2's Chief Designer, the story behind how the Hy-Power concept is quite interesting...

Quote:
Interview Lance Scott, Chief Designer, Toyota ED2

Lance Scott led the team which produced the Toyota C-HR Hy-Power Concept.

He explains how the project was delivered.

What contribution did the ED2 design centre make to the production Toyota C-HR?

Lance Scott: We were involved in the early stages of the project for both exterior and interior design. We developed the original concept exterior that was shown in Paris in 2014 and revised it for the Frankfurt motor show in 2015 as a preview of the main exterior design themes. For the interior design, our proposal was the direction selected during the internal design competition phase and was developed for production.

The production model already has a dramatic and highly distinctive design – what impact did this have on producing an even stronger look for the HY-POWER Concept?

When we started the project, we knew that we didn’t have to make any dramatic changes to the overall design. What we wanted to do was almost to purify or concentrate the unique value of the Toyota C-HR and see how we could give it further emphasis by using a new and unique colour and interior trim execution.

Did the status and success of the model have an influence on how you approached the project?

The fact that the Toyota C-HR is a key model that was recently launched and has been selling well made us aware that we shouldn’t cause any confusion with the show car. We went back to the original brief and the target customer profile to identify how we could accentuate the design while remaining faithful to its original direction.

What challenges and opportunities did the show car design process present?

The challenge was not to stray away from the qualities that define the Toyota C-HR, but to add to them in a fresh and original way. For example, we wanted to retain the high quality of the production car, so we explored different ways of expressing uniqueness in the interior. By using a high-quality leather trim with a unique gradation yarn and stitch patterns, were able to build on the fundamental qualities of the interior ambience.

How did you interpret the Toyota C-HR’s diamond design theme?

The diamond theme prompted us to think about the process by which a diamond is made from carbon. Carbon itself has very interesting qualities and the led us to producing a new fluid carbon exterior colour treatment with a look that is not matt, but not gloss in appearance either. This in turn made us think about molten materials, such has lava, which presents a powerful contrast between its cooled upper surface and red hot liquid centre. This was the inspiration for creating the roof colour and a dynamic pattern that progresses from vivid red to black.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
ToyotaCHRAdmin is offline  
Sponsored Links
Advertisement
 
post #2 of 3 (permalink) Old 09-26-2017, 05:16 PM
SiR
Senior Member
 
Join Date: Nov 2015
Posts: 551
I like the fact that a lot of things done here can be done on a production level, so its very possible that eventually we will get a special edition that resembles this, or at least carries on a similar idea in a different expression.
SiR is offline  
post #3 of 3 (permalink) Old 10-01-2017, 12:07 AM
Senior Member
 
Join Date: Nov 2015
Posts: 410
Glad the decided to stay true to the concept in the C-HR's design, just streamline it a bit for production but most of what made the concept special was retained. From the sounds of it, a few other designs were submitted and theirs was chosen, can't imagine the C-HR with another styling.
TubeMan is offline  
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Toyota C-HR Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



Similar Threads
Thread Thread Starter Forum Replies Last Post
Flaming Hot C-HR Hy-Power Concept Revealed Toyota C-HR News 2017+ Toyota C-HR News 0 09-12-2017 03:11 PM
What To Like About The 2017+ Toyota CH-R ToyotaCHRAdmin 2017+ Toyota C-HR News 4 03-24-2017 11:57 AM
Toyota C-HR Still Embodies Scion’s Spirit Toyota C-HR News 2017+ Toyota C-HR News 1 03-17-2017 12:32 PM
Toyota C-HR Launched In Japan Toyota C-HR News 2017+ Toyota C-HR News 6 01-09-2017 08:16 AM
How Toyota's 2016+ CHR Stands Out From The Crowd ToyotaCHRAdmin 2017+ Toyota C-HR News 1 12-13-2016 06:12 PM

Posting Rules  
You may not post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome